120W IP67 Class 2 Multi-channels Triac Dimmable LED Driver

Features:

·Output constant voltage

·UL cUL listed, Class 2, Class P, Type HL, FCC, NEMA 4X, CE, RoHS, T24

·Universal input, 110-277Vac 

·Build in active PFC, typical power factor>0.95, THD<10%@120V Max. load

·High efficiency: up to 88%

·Load: 0.01-100%                                        

·Short-circuit, over-temperature, over-load protection                  

·Full protection metal case, for dry, damp, and wet locations 

·Flicker-free

·Suitable for LED lighting and moving sign applications 

Product Advantage：

Specification

Derating Curve

To extend their life, please refer to the Derating Curve and derate according to the temperature.

To extend their life, please refer to the Derating Curve and derate according to the temperature

Mechanical Specification （120W 2CH / 192W 2CH）

                                                                                                                                                                                                                                                                   Unit:mm

                                                                                                                                                                                                                                                                   Tolerance:0.5-2mm

Mechanical Specification （180W 3CH）

Input wire Black and White to be connected to AC L and N, Green wire go ground, 

Output wire Red to LED Positive side (+), Black to LED Negative side (-).  

Please make sure you connect these correctly otherwise your product will not function correctly and could be damaged.

Note: Any other requests we can customize.

Connecting Diagram

Using TRIAC/Phase cut dimming

1. The Pulse-Width Modulation (PWM) of the output voltage can be adjusted through the input terminal of the AC phase line(L) by connecting a phase /Triac dimmer of a lighting system.

2. Work with forward phase /leading edge, MLV and reverse phase /trailing edge, ELV, and TRIAC dimmers.

3. Please try to use dimmers with power at least 1.5 times the output power of the driver. 

Using TRIAC MLV Wiring Diagram

Using TRIAC ELV Wiring Diagram

The topology

PFC load graph

PWM dimming curve 

VR dimming curve

 Instruction:

1)This driver should be installed by qualified and professional person;

2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.

3)Ensure that wiring is correct before the test to avoid light and power supply damage;