NameDescriptionContent
  • 300W 24V
    ❤ Add to collection
  • 300W 24V

     0/1-10V PMW (3 in 1)  dimmable  Constant Voltage  LED Driver IP67

    Spec Sheet Download

    • U.S.$0.00
      U.S.$0.00
      U.S.$0.00
      U.S.$0.00
    • Satisfaction:

      Sales: 0

      Review: 0

    Weight:0.00KG
    • Quantity:
Description

 0/1-10V PMW (3 in 1)  dimmable  Constant Voltage  LED Driver IP67

Spec Sheet Download


300W IP67 waterproof constant voltage 0/1-10V PWM dimmable led driver

Input Voltage: 100-277VAC
Power Range:80-300W
High Efficiency: up to 86% ; PF>0.95
IP67 Design; Flicker-free
PWM Output Design
Loading: 10%-100% Dimming: 0-100%
Cooling by free air convection
Suitable for dry, damp, or wet location use
Compatible with 0/1-10VDimmers
Protection:short circuit/over loading /over current/ Over temperature
7 years warranty



Model No.PowerOutput VoltageOutput CurrentWeight(kg)Size(L*W*Hmm)Packing

OTM-PD80-12-F
OTM-PDA80-12-F

80W

12V

24V

6.67A
3.33A

1.1230*70*43290*270*160mm/30pcs /CTN

OTM-PD96-24-F

96W

12V

24V

4A

1.1230*70*43290*270*160mm/30pcs /CTN

OTM-PD100-12-F
OTM-PD100-24-F

100w

12V

24V

8.33A
4.17A

1.1230*70*43330*270*160mm/30pcs /CTN

OTM-PD120-12-F
OTM-PD120-24-F

120w

12V

24V

10A
5A

1.1

 230*70*4360*270*175mm/30pcs /CTN

OTM-PD150-12-F
OTM-PD150-24-F

150W

12V

24V

12.5A

6.25A

1.5256*78*47360*270*175mm/30pcs /CTN

OTM-PD200-12-F
OTM-PD200-24-F

200W

12V

24V

16.67A
8.33A

1.5256*78*47395*255*170mm,30pcs /CTN
OTM-PD300-12-F
OTM-PD300-24-F
300W

12V

24V

25A
12.5A
1.7276*78*48390*310*185mm,10pcs /CTN


Specifications

ProtectionShort Circuitshut down o/p voltage, re-power on to recover after fault condition removed
Over Loading30W: ≤120% shut down o/p voltage, re-power on to recover after fault condition removed
60W/300W: ≤120% Hiccup mode,recovers automatically after fault condition is removed
80W-120W: ≤120% constant current limiting, auto-recovery
Over temperature100℃±10℃ shut down o/p voltage, automatically recover after cooling
EnvironmentWorking TEMP.40~+60℃
Working Humidity20 - 95%RH,non-condensing
Storage TEMP. Humidity-40~+80℃,10~95%RH
TEMP .cofficient±0.03%/℃(0~50℃)
Vibration30W-60W: 10~500Hz, 2G 10min./1 cycle,period for 60min. each along X,Y,Z axes
80W-300W: 10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes
Safety& EMCSafety standardsUL8750 +UL1310,CAN/CSA-C22.2 No.250.13
EN61347-1 EN61347-2-13
Withstand voltageI/P-O/P:1.88KVac
Isolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%R
EMC EMISSIONFCC 47 CFR Part 15 Subpart B, EN55015,EN61000-3-2,3 (≧60%loading
Notes1. All parameters NOT specially mentioned are measured at 120VAC input , rated load and 25℃ of ambient temperature.
2. Tolerance: includes set up tolerance, line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.


Package


Dimensions


Driver Connecting Diagram



Dimming Operation

※ Built-in 3in 1 dimming function,Output luminous can be adjusted through output cable connecting a resistance or 0/1-10Vdc or 10V PWM signal between DIM+ and DIM-
※ Please DO NOT connect "DIM-"to " LED-"



Warning
※1)This driver should be installed by qualified and professional person;
※2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
※3)Ensure that wiring is correct before test in order to avoid light and power supply damage;
※4)f driver Cannot work normally, don’t maintain privately; Have any question, please contact us.

















  • User name Member Level Quantity Specification Purchase Date
  • Satisfaction :
No evaluation information
Dimmable LED Driver
5 in 1 Dimmable
Triac Dimmable
3 in 1 Dimmable
Dali Dimmable
0/1-10V Dimmable
DALI+PUSH Dimmable
Non Dimmable LED Driver
IP 20
IP 67
Submit product