Constant Voltage IP20 LED Driver
Applied to LED Strip Light,LED Module,LED Neon,LED mirror light,LED Furniture light,etc
Spec Sheet Download
Input Voltage: 100-240VAC
Power Range:6-30W
High Eficiency: up to 89% ; PF>0.6
P20 Design; Flicker-free
Cooling by free air convection
Suitable for dry or damp location use
Protection:short circuit/over loading/over current/ Over temperature
3 years warranty
| Model No. | Power | Output Voltage | Output Current | Weight | Size(L*W*Hmm) | Packing |
OTM-SS6-E12
OTM-SS6-E24 | 6W | 12V 24V | 0.5A 0.25A | 45g | 91*41*18.6 | 40*30*20CM,200PCS/CTN |
OTM-SS12-E12
OTM-SS12-E24 | 12W | 12V 24V | 1A 0.5A | 45g | 91*41*18.6 | 40*30*20CM,200PCS/CTN |
OTM-SS20-E12
OTM-SS20-E24 | 15w | 12V 24V | 1.25A 0.625A | 65g | 91*41*18.6 | 40*30*20CM,200PCS/CTN |
OTM-SS20-E12
OTM-SS20-E24 | 20w | 12V 24V | 1.66A 0.83A | 65g | 91*41*18.6 | 40*30*20CM,200PCS/CTN |
OTM-SS24-E12
OTM-SS24-E24 | 24W | 12V 24V | 2A 1A | 65g | 91*41*18.6 | 40*30*20CM,200PCS/CTN |
OTM-SS30-E12
OTM-SS30-E24 | 30W | 12V 24V | 2.5A 1.20A | 65g | 91*41*18.6 | 40*30*20CM,200PCS/CTN |
Specifications
| Protection | Short Circuit | Hiccup mode, recover automatically after fault condition is removed |
| Over Current | ≤1.2*| out |
| Over Loading | ≤120% |
| Over temperature | 100°C士10°C,Shut down o/p voltage,recover automatically after temperature goes down. |
| Environment | Working TEMP. | -40~+60°C |
| Working Humidity | 20~90%RH, non-condensing |
| Storage TEMP. Humidity | -40~+80°C， 10~95%RH |
| TEMP .cofficient | 士0.03%/°C (0~50°C) |
| Vibration | 10~500Hz，2G 12min./1 cycle,period for 72min. each along X,Y,Z axes |
| Safety& EMC | Safety standards | EN61347-1 EN61347-2-13 |
| Withstand voltage | I/P-O/P:3KVAC IP-FG:1.88KVAC O/P-FG:0.5KVAC |
| Isolation resistance | I/P-O/P I/P-FG O/P-FG:100MΩ/500VDC/25*C/70%RH |
| EMC EMISSION | EN55022, EN55015 Class B |
| Notes | 1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25°C of ambient temperature. 2. To extend the driver's using life ,please reduce the loading at lower input voltage |
Package
Dimensions
Driver Connecting Diagram
Warning
※Prevent to reverse polarity;
※Risk of Electric Shock. When used outdoors, install only on a circuit protected by a Class A GFCI;
※Risk
of Fire. Istallation involves special wiring methods to run wiring
through a building structure. Consult a qualified electrician;
※Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.
