NameDescriptionContent
  • 100W 12V Dimmable LED Driver for Professional Lighting
    100W 12V Dimmable LED Driver for Professional Lighting
    100W 12V Dimmable LED Driver for Professional Lighting
    100W 12V Dimmable LED Driver for Professional Lighting
    100W 12V Dimmable LED Driver for Professional Lighting
    100W 12V Dimmable LED Driver for Professional Lighting
    100W 12V Dimmable LED Driver for Professional Lighting
    100W 12V Dimmable LED Driver for Professional Lighting
    100W 12V Dimmable LED Driver for Professional Lighting
    ❤ Add to collection
  • 100W 12V Dimmable LED Driver for Professional Lighting

    110-277Vac
    0.01-100%
    0.01-100%
    5 in 1 Dim.
    constant voltage
    IP20
    7 years
    CE,UL,Class 2,Class P,SELV

    100W constant voltage 12V 24V 5 in 1 dimmable led driver 

    Spec sheet Download

    • U.S.$0.00
      U.S.$0.00
      U.S.$0.00
      U.S.$0.00
    • Satisfaction:

      Sales: 0

      Review: 0

    Weight:0.00KG
    • Quantity:
Description

100W constant voltage 12V 24V 5 in 1 dimmable led driver 

Spec sheet Download


100w constant voltage 12V/24V Triac/0-10V/1-10V/Potentiometer/10V PWM 5 in 1 Dimmable led driver

                                                                                                        

Features:

Output constant voltage
UL cUL listed, Class 2, Class P, Type HL, FCC, NEMA 4X, CE, RoHs
Universal input, 110-277Vac
Build in active PFC, typical power factor>0.95
THD<20%@120V Max. load
High efficiency : up to 80%
Load: 0.01-100%
Short-circuit, over-temperature, over-load protection
Plastic enclosures can be used indoors or for dry, damp location
Flicker-free
Suitable for LED lighting and moving sign applications




Product advantage:


•Dim-all: Triac/0-10V/1-10V/10V PWM/Potentiometer

•Switch to PWM or Voltage regulation output

•Dimming effect:

..Voltage Reduce mode: 100%-0.01% dim, stepless dimming,flicker-free,

..PWM dim mode:100-0.01% dim, flicker-free

•Triac dim mode: Forward phase & reverse phase, MLV, ELV dim

•Flexible wiring compartment to adjust the AC and DC wiring space

•Title 24 JA8 compliant

•Constant voltage type, fine tune of output voltage

•Super low loading request, works perfect at 0.01-100% load.

•7 years warranty

•Dimming range: 100%-0.01% Ultra Deep Amplitude 

•No Vpeak-peak during driver on/off and dimming, no harm to the LED for long-term using, and slow down the speed of

 .lumen depreciation.

•Works with single channel CCT warm-dim LED strip/tape (2 wires).

•Switching different output mode, can be compatible with more different types of LED lamps

•Compatible with DC-DC design LED fixture, such as MR16, PAR, wall washer, linear lighting, LED strip/type

Specification

ModelOTM-VPA100-E12OTM-VPA100-E24OTM-VPA100-E36OTM-VPA100-E48
Certificates UL, cUL listed, Class 2 unit, Type HL rated, FCC
OutputDC Voltage12V24V36V48V
Rated Current8.3A4.16A2.77A2.08A
Rated Power100W100W100W100W
Voltage Tolerance±0.5V
Voltage Regulation±0.5%
Load Regulation±1%
InputVoltage Range110-277VAC
Frequency Range47-63Hz
Power Factor(Typ.)@ full load0.98@120VAC  0.97@277VAC
THD(Typ.)@ full load<20% @120VAC &277VAC
EfficiencyTyp.@ full load

12V/24V 86% @120Vac  88%@277Vac         

36V/48V 88% @120Vac  89%@277Vac

AC Current(Max.)1.3A@110Vac
Inrush Current (Typ.)20A, 50%, 1.6ms @120Vac     25A, 50%, 1.2ms @277Vac
Leakage current<0.50mA
ProtectionShort Circuitshut down o/p voltage, re-power on to recover after fault condition is removed
Over Loading≤120% shut down o/p voltage, re-power on to recover after fault condition is removed
Over temperature100℃±10℃ shut down o/p voltage, automatically recover after cooling.
EnvironmentWorking TEMP.-40~+60℃ (see below derating curve)
Working Humidity20~90%RH, non-condensing
Storage TEMP. Humidity-40~+80℃,10~95%RH
TEMP .coefficient±0.03%/℃(0~50℃)
Vibration

10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes

Safety& EMCSafety standardsUL8750+UL1310
Withstand voltageI/P-O/P:1.88KVAC
Isolation resistanceI/P-O/P:100MΩ/500VDC/25℃/70%RH
EMC EMISSIONFCC Part 15 B
othersNet. Weight0.4Kg
Size212*56*24mm   (L*W*H)
packing

20PCS/CTN

Notes1. All parameters if NOT specially mentioned are measured at 120VAC input , rated load and 25℃of ambient temperature.
2. To extend the driver's using life ,please reduce the loading at lower input voltage.


Derating Curve

To extend their life, please refer to the Derating Curve and derate according to the temperature.



To extend their life, please refer to the Derating Curve and derate according to the temperature



Mechanical Specification:

                                                                                                                                                                                                                                                                   Unit:mm

                                                                                                                                                                                                                                                                   Tolerance:0.5-2mm


Input with terminals Live(L) and Neutral(N) wires to be connected AC

Output wire Red to LED Positive side (+) , Black  to LED Negative side (-).  

Dimming cable DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Pink to 0/1-10V dimmer signal (-) 

Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection.  

Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.

Note: Any other requests we can customized. 


Connecting Diagram

Using TRIAC/Phase cut dimming

1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.

2.Work with forward phase /leading edge ,MLV and reverse phase /trailing edge ,ELV,TRIAC dimmers.

3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.





Using 0-10/1-10V dimming(1)


Using 0-10/1-10V dimming(2)


Using 0-10/1-10V dimming(3)




The topology



PFC load graph




PWM dimming curve 


VR dimming curve





 Instruction:


1)This driver should be installed by qualified and professional person;

2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.

3)Ensure that wiring is correct before test in order to avoid light and power supply damage;









  • User name Member Level Quantity Specification Purchase Date
  • Satisfaction :
No evaluation information
Dimmable LED Driver
5 in 1 Dimmable
Triac Dimmable
3 in 1 Dimmable
Dali Dimmable
0/1-10V Dimmable
DALI+PUSH Dimmable
Non Dimmable LED Driver
IP 20
IP 67
Submit product