NameDescriptionContent
  • 30W
    30W
    30W
    30W
    30W
    30W
    30W
    30W
    ❤ Add to collection
  • 30W

    5 in 1 Linear Dimmable LED Driver
    Triac dimmable/0-10v/1-10v/10v PWM/Potentiometer
    Loading: 10-100%
    Dimming: 0-100%


    Spec Sheet Download


    • U.S.$0.00
      U.S.$0.00
      U.S.$0.00
      U.S.$0.00
    • Satisfaction:

      Sales: 0

      Review: 0

    Weight:0.00KG
    • Quantity:
Description

5 in 1 Linear Dimmable LED Driver
Triac dimmable/0-10v/1-10v/10v PWM/Potentiometer
Loading: 10-100%
Dimming: 0-100%


Spec Sheet Download



·Output constant voltage/VR or PWM output set selection

·Range: 110-277VAC    

·Built-in active PFC function Power Factor: up to 0.95

·Efficiency up to 80% 

·Dimming: 100-0.1% at PWM output,100%-0.01% dim at VR output,

·Load: 10-100% at PWM output, 0.01-100% at VR output

·Protection:short circuit/over loading/ Over temperature

·Full protection plastic case, IP67 for indoor and outdoor installation

·Flicker-free

·Dimming function:

·Phase dimming: work with leading edge and trailing edge TRIAC dimmers 

·1-10V dimming: 0-10V/1-10V/Potentiometer/10V PWM 5 in 1

·Cooling by free air convection                             

·Suitable for LED lighting and moving sign applications   

Model

OTM-VPA30-SW12

OTM-VPA30-SW24

Output

DC Voltage

12V

24V

Voltage Tolerance

±0.5V

Voltage Regulation

± 0.5%

Rated current

2.5A

1.25A

Rated power

30W

Load Regulation

±2%

Input

Voltage Range

110-277VAC 

Frequency Range

47 - 63Hz

Power Factor(Typ.)@ full load

PF≥0.95/230VAC

THD(Typ. ) @ full load

<20%

Efficiency(Typ.)@ full load

78%@120VAC    80% @277VAC.

78%@120VAC    80% @277VAC.

AC Current(Max.)

0.35A@110VAC

Inrush Current (Typ.)

40.8A,50%,102us

Leakage current

<0.5mA 

Protection

Short Circuit

shut down o/p voltage, re-power on to recover after fault condition removed

Over Load

≤120% shut down o/p voltage, re-power on to recover after fault condition is removed

Over temperature

100℃±10℃

Protection Class

IP67

Environment

Working TEMP.

-40~+60℃ (see below derating curve)

Working Humidity

20 - 90%RH,non-condensing 

Storage TEM.,Humidity

-40 - +80℃,10 - 95%RH

TEMP.coefficient

±0.03%/℃(0 - 50℃)

Vibration

10~500Hz, 5G 10min./1 cycle,period for 60min. each along X,Y,Z axes 

Safety & EMC

Safety standards

UL8750+UL1310   

Withstand voltage

I/P-O/P:3.75KVAC  I/P-FG:1.88KVAC  O/P-FG:0.5KVAC 

Isolation resistance

I/P-O/P I/P-FG O/P-FG: 100MΩ/500VDC/25℃/70%RH  

EMC Emission

FCC Part 15 B

Others

Net Weight

0.35Kg  

Dimension

262*33*21mm(L*W*H)

packing

290*270*160mm/   30pcs /CTN    G.W.: KG/CTN  

Notes

1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25℃of ambient temperature.

2. Tolerance: includes set up tolerance, line regulation and load regulation .

3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again.

Driver Connecting Diagram



UsingTriac MLV wiring diagram


※Using 0-10/1-10V dimming (2)

※Using 0-10/1-10V dimming (3)


Size Drawing:



     ※Input : Cable H05RN-F 3*1.0mm² Brawn(L)and Blue(N) to connect to L and N of Mains AC;the green /yellow cable connect with (FG),

※Output : Cable H05RN-F 2*1.0mm²  "Red" (+) to  LED Positive side (+) , "Black"(-)  to LED Negative side (-).  

※Dimming cable DIM (+) Purple to 0/1-10V dimmer signal(+ ),DIM (-) Grey to 0/1-10V dimmer signal (-)

※Switch output mode:The default output is VR mode,To switch the output to PWM, short connect the blue line and the white line

※Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.

※Note: Any other requests we can customized.

     




Dimming Operation

※The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a triac dimmer.
※Usually matching with leading edge/Forward Phase Triac Dimmers( Can customized as a driver only matching trailing edge/reverse phase Triac Dimmers if needed).
※Please try to use dimmers with power at least 2.5 times as the output power of the driver.
※for Forward phase,Magnetic low voltage and Triac Dimmers



Warning
※Prevent to reverse polarity;
※Risk of Electric Shock. When used outdoors, install only on a circuit protected by a Class A GFCI;
※Risk of Fire. Istallation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician;
※Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the ground surface.





  • User name Member Level Quantity Specification Purchase Date
  • Satisfaction :
No evaluation information
Dimmable LED Driver
5 in 1 Dimmable
Triac Dimmable
3 in 1 Dimmable
Dali Dimmable
0/1-10V Dimmable
DALI+PUSH Dimmable
Non Dimmable LED Driver
IP 20
IP 67
Submit product