96W Supports Dimming Linear Bicolor 5 in 1 Dimmable LED Driver

96W 5 in 1 Dimmable LED driver Supports dimming linear bicolor Triac/0-10V/1-10V/Potentiometer/10V PWM

Features:

·Output constant voltage

·UL cUL listed, Class 2, Class P, FCC, CE, RoHs, T24, SAA

·Universal input, 110-277Vac 

·Build in active PFC, typical power factor>0.95, THD<10%@120V Max. load

·High efficiency : up to 90%

·Load: 0.01-100%                                        

·Short-circuit, over-temperature, over-load protection                  

·Full protection metal case, for dry, damp, wet location 

.Plastic enclosures can be used indoors

·Flicker-free

·Suitable for LED lighting and moving sign applications  

Product advantage：

Derating Curve

                                                                                                                           To extend their life, please refer to the Derating Curve and derate according to the temperature.

Mechanical Specification 

                                                                                                                                                                                                                                              Unite: mm

                                                                                                                                                                                                                                             Tolerance: 0.5-2mm 

 Input with terminals Live(L) and Neutral(N) wires to be connected AC;

 Output LED SEC output Positive (LED+) , output negative(LED-). Connected to LED light.

Output terminals DIM (+) to 0/1-10V dimmer signal(+ ),DIM (-) white connect to 0/1-10V dimmer signal (-) 

Please DO NOT connect “DIM-“ to “LED-“, “DIM+” to “ LED+” ,or other incorrect connection. 

 Please make sure your connect these correctly otherwise your product will not function correctly and could be damaged.

 Note: Any other requests we can customized.   

Connecting Diagram 

Using TRIAC/Phase cut dimming

1.The Pulse-Width Modulation (PWM) of output voltage can be adjusted through input terminal of the AC phase line(L) by connection a phase /Triac dimmer of lighting system.

2. Work with forward phase /leading edge ,MLV and reverse phase /trailing edge ,ELV,TRIAC dimmers. 

3.Please try to use dimmers with power at least 1.5 times as the output power of the driver.

Using 0-10/1-10V dimming （1）

Using 0-10/1-10V dimming （2）

Using 0-10/1-10V dimming （3）

CW Output mode connecting diagram

(Triac dinming)

(0-10/1-10V dimming)

The topology

PFC load graph

Switch mode

Switch to PWM output mode

Works with single channel CCT warm-dim LED strip/tape (2 wires).

Switch to CW output mode

Works with dual channel CW color temperature LED strip/tape (3wires). 

Switch to VR output mode

Works with single channel CCT warm-dim LED strip/tape (2 wires).

PWM dimming curve                                                                                                                                 VR dimming curve

C W PWM dimming curve                                                                                                                          Color temperature curve

Instruction:
1)This driver should be installed by qualified and professional person;
2)Please make sure the driver is installed with adequate ventilation around it to allow for heat dissipation.
3)Ensure that wiring is correct before test in order to avoid light and power supply damage;